Menu
Cart 0

Rocket's Red Glare Recipe

Posted by Serge K on

Rocket's Red Glare

Rocket's Red Glare (8.5 Litres)

A well balanced American Amber Ale that glows with a tinge of red. Flavour is lush with caramel and toffee malt that are the heart of its foundation. Cascade hops provide a nice hit of citrus in the aroma as you taste, rounding out the malty finish.

Ingredients

  • 1.3kg Mr Beer Bewitched Amber Ale
  • 250g Mr Beer Golden Malt Extract
  • 12g Cascade Hop Pellets
  • Pack of Mr Beer Carbonation Drops

Features:

  • Colour: Amber
  • Body: Heavy
  • Bitterness: Medium
  • Approx. Alcohol Level: 6.5% ABV
  • Naturally Carbonated: Natural

Instructions:

Step 1 : Mix

Clean and sanitise all equipment that will come in contact with the brew. In a 2 litre pan, mix a 250g pouch of Golden Malt Extract with 500ml of water and bring to the boil. Add the Cascade Hop Pellets and boil for 10mins. Remove from heat and cool the pan in a sink of iced water. Strain the cooled malt/hop mix into the Fermenting Vessel (FV). Add the Bewitched Amber Ale to the FV. Fill the FV with cold water to the 8.5 litre mark. Sprinkle the yeast and fit the lid

Step 2: Brew

Place the FV in a location out of direct sunlight and try to ferment between 20C-24C. Fermentation should take 7 to 14 days. At around day 7 check the specific gravity (SG). Check the SG again the following day and so on.

Step 3:Bottle

The brew is ready once the SG has stabilised over a couple of days. Gently fill clean PET bottles to about 3cm from the top. Add 2 carbonation drops per bottle and secure the caps. Store the bottles upright in a location out of direct sunlight at or above 18C.

Step 4: Enjoy

After at least two weeks, check for sufficient carbonation by squeezing the bottles. Bottles kept unrefrigerated should improve with age. When ready to drink, chill the bottles upright. The chilled beer may be poured into clean glassware, leaving the sediment behind. Expect the alcohol content to be approximately 6.5 %ABV.


Share this post



← Older Post Newer Post →


Leave a comment